lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-10-2014, 04:58 AM   #1
Roy Anderson
Not Yet Wild
 
Roy Anderson's Avatar
Club Car
 
Join Date: Feb 2014
Location: Port Elizabeth, South Africa
Posts: 21
Default Snubber enquiry

Hi, this is my first posting. I have been told by fellow members of my club that my '92 cart has a snubber missing. After searching through your forums I found what I was looking for but how does one actually fit the thing? I can only pick the engine tray up by about 1 cm. Thanks
Attached Images
File Type: jpg enginemount.jpg (62.2 KB, 0 views)
Roy Anderson is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-10-2014, 12:17 PM   #2
Springbok
Photoshop Guy
 
Springbok's Avatar
Club Car
 
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,650
Default Re: Snubber enquiry

It looks like this. The tongue of your engine cradle just slides into the flat opening and just rests there in the frame. Should be able to install it without any tools.

Springbok is offline   Reply With Quote
Old 02-10-2014, 02:47 PM   #3
Roy Anderson
Not Yet Wild
 
Roy Anderson's Avatar
Club Car
 
Join Date: Feb 2014
Location: Port Elizabeth, South Africa
Posts: 21
Default Re: Snubber enquiry

Thanks for response
Roy Anderson is offline   Reply With Quote
Old 02-10-2014, 03:29 PM   #4
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,502
Default Re: Snubber enquiry

The difficult part with your 92 cart, is that your snubber bracket is welded on!
(unlike Springboks older cart, and my newer cart, which are both bolted on!)

I use a floor jack and jack up the engine pan just so the snubber will fit in between the two frame stops, lining up the slot,
the difficult part for you, will be trying to slide the snubber onto the bracket in between the frame stops... from the side!
Have some patients... and be prepared to say a few nasty words... But, it WILL go on from the side!

A little dish soap on the snubber bracket may help also!
lockman1 is offline   Reply With Quote
Old 02-11-2014, 12:39 AM   #5
F239141
Getting Wild
 
F239141's Avatar
Club Car
 
Join Date: Jan 2014
Location: Squaw Valley, CA / Fairhope, AL
Posts: 89
Default Re: Snubber enquiry

What part of the snubber points up I need to install mine and there ain't one there to look at
F239141 is offline   Reply With Quote
Old 02-11-2014, 02:48 AM   #6
Roy Anderson
Not Yet Wild
 
Roy Anderson's Avatar
Club Car
 
Join Date: Feb 2014
Location: Port Elizabeth, South Africa
Posts: 21
Default Re: Snubber enquiry

Thanks LOCKMAN1 that is going to be very useful, mine is on order as we speak. Will securing some compressed rubber with cable ties between the snubber bracket and the frame be of any use until the snubber arrives?
Roy Anderson is offline   Reply With Quote
Old 02-11-2014, 03:04 AM   #7
F239141
Getting Wild
 
F239141's Avatar
Club Car
 
Join Date: Jan 2014
Location: Squaw Valley, CA / Fairhope, AL
Posts: 89
Default Re: Snubber enquiry

Quote:
Originally Posted by Roy Anderson View Post
Thanks LOCKMAN1 that is going to be very useful, mine is on order as we speak. Will securing some compressed rubber with cable ties between the snubber bracket and the frame be of any use until the snubber arrives?
That's how mine was when I got it, looked like they used a piece of radiator hose
F239141 is offline   Reply With Quote
Old 02-11-2014, 03:08 AM   #8
Roy Anderson
Not Yet Wild
 
Roy Anderson's Avatar
Club Car
 
Join Date: Feb 2014
Location: Port Elizabeth, South Africa
Posts: 21
Default Re: Snubber enquiry

Interesting, have you got your snubber yet. Is your bracket also welded on?
Roy Anderson is offline   Reply With Quote
Old 02-11-2014, 07:14 AM   #9
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,502
Default Re: Snubber enquiry

Quote:
Originally Posted by F239141 View Post
What part of the snubber points up I need to install mine and there ain't one there to look at
The round/open side goes up! (it may be the only way it'll fit!)

Snubber 3.jpg

Quote:
Originally Posted by Roy Anderson View Post
Thanks LOCKMAN1 that is going to be very useful, mine is on order as we speak. Will securing some compressed rubber with cable ties between the snubber bracket and the frame be of any use until the snubber arrives?
You can if the "clunking" of the bracket to the frame annoys you,
but, it won't hurt anything if you run without it until the snubber comes in!

lockman1 is offline   Reply With Quote
Old 02-11-2014, 10:46 AM   #10
Roy Anderson
Not Yet Wild
 
Roy Anderson's Avatar
Club Car
 
Join Date: Feb 2014
Location: Port Elizabeth, South Africa
Posts: 21
Default Re: Snubber enquiry

Thanks again. Info most useful
Roy Anderson is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Snubber Mod Gas Club Car
snubber Gas Club Car
Need A Snubber ..... anybody got one ? Gas Club Car
my snubber keeps falling off Gas Club Car


All times are GMT -5. The time now is 11:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.