|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
|
08-23-2020, 11:20 AM | #1 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Curtis 400 amp controller ---lug wire
2003 CC DS---can anyone tell me where the lug wire connects (see arrow)
|
08-23-2020, 11:30 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,128
|
Re: Curtis 400 amp controller ---lug wire
Does that plug into the factory harness or the new controller? Which pin?
|
08-23-2020, 11:47 AM | #3 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Curtis 400 amp controller ---lug wire
Looks like a black wire, and it's short enough I would assume it goes to the B- terminal on the controller, but you know what they say about assuming...
Like KGSC said, which pin is the wire on in the harness, and which end does that connector plug into? |
08-23-2020, 12:13 PM | #4 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Re: Curtis 400 amp controller ---lug wire
everything is plugs into the old harness, except this lug wire with black and white wires
|
08-23-2020, 10:19 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,128
|
Re: Curtis 400 amp controller ---lug wire
Right. We just need to know what pin that wire is connected to so we can figure out what it is for.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
danaher to curtis orange wire ? | Electric EZGO | |||
Broken wire #24 on curtis 1264 controller | Electric EZGO | |||
5 wire curtis throttle | Electric EZGO | |||
How to wire Curtis Control box to a 2005 Ezgo | Electric EZGO |