36v g9 still looking for any help

[DoubleEgan]

Hope to figure this out with some help
trying to reword it for any help

At the motor what are the volts touching each post separate
Using multimeter, Black on the negative battery post red on the motor posts
I am getting 19.7 at each separate post
A1 _____ volts
S1 _____ volts
A2 _____ volts
S2 _____ volts
Reverse forward switch what is the voltage at each post
Using multimeter, Black on the negative battery post red on the switch posts
I am getting 19.7 at each separate post
S _____ volts
F2 _____ volts
F 1_____ volts
R _____ volts
At the 2 Diode voltage
Using multimeter wires 1 way should say 0 and flip wires it should say ______ volts
The Solenoid should say _________ volts, using multimeter on both large post at the same time with pedal pressed
Pedal not pressed ___________ volts
The Solenoid should say _________ volts, using multimeter on both small post at the same time with pedal pressed
Pedal not pressed ________ volts
At the controller box main wire leading from solenoid should say ____________ volts
After the main wire goes into controller box the wire says ______________ volts after

Looks like a third grade test but it would answer a lot to find problem
Asking every question I can think