|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-01-2015, 11:17 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2015
Posts: 25
|
Help in removing G2E forward reverse handle
Can someone explain how to take the forward reverse handle off a yamaha
G2E? I don't see a bolt or anything on the outside and until I can get a step by step guide, I don't want to mess with anything on the inside. I feel like I am about to break the handle off. Thanks in advance. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-02-2015, 03:46 PM
|
#2 |
|
Not Yet Wild
Join Date: Aug 2015
Location: Ft worth, texas(NOT DALLAS)
Posts: 17
|
Re: Help in removing G2E forward reverse handle
Not sure if it's the same but on my g9 there is a retaining clip inside the body that holds it on. Remove the switch and it's easily accessible
|
|
|
|
|
10-02-2015, 06:34 PM
|
#3 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Help in removing G2E forward reverse handle
Correct Whitetrash. You should disconnect battery cable (36 volts positive or negative) just in case. Remove the 4 10mm head bolts and spacing collars. Don't lose the coulpler between the f/r switch and the handle. Then just a C-clip.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Removing the forward/reverse switch on g9 | Gas Yamaha | |||
| G8 forward/reverse handle | Gas Yamaha | |||
| Can't remove Forward/Reverse handle | Electric Club Car | |||
| Forward/Reverse handle | Electric EZGO | |||
| forward and reverse handle getting harder to turn | Electric EZGO | |||
Linear Mode
