|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-05-2015, 04:33 PM | #1 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
48v G29 slight growl on decel
New to the cart world but not wrenches and toys. Im looking at a deal on a 08 g29 that has a slight growl on deceleration. Being that Im not very up to date on the regen braking system I have a few questions. Seller (nice guy) says they pulled the motor and found it to have zero shaft play, changed the gear oil and reinstalled. I rode the cart a few blocks today and its silent until the regen brake kicks in, and if you unplug the motor sensor thingy it makes a little noise while underway and a little more noise under regen. Any of you guys ran across this before?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2015, 07:39 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 48v G29 slight growl on decel
Check for "white tag" axle. Dont know what that means? Search here. The "white tag" team axle has a bad gear in it that is destined to fail, just a question of how soon. Also, does the cart have aftermarket high speed gears?
|
10-05-2015, 08:02 PM | #3 |
Gone Wild
Join Date: Sep 2013
Location: Jacksonville, Fl
Posts: 170
|
Re: 48v G29 slight growl on decel
Take the motor off and inside the shaft of the armature there is a bushing. Those bushings wear down and you get chatter. Take the bushing out, put a penny or two in the shaft and the place the bushing back in with a dab of grease. Chatter will stop
|
10-05-2015, 08:29 PM | #4 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
Carts retired from a golf course in Alabama so I'm fairly sure the gears are stock, it had the fisn 300 amp controller in it for most of its life for one reason or another. I bought my current cart from these guys and traded the stock controller for the fisn and now I'm up to 22 mph on my 2011. Put the stock box back into this 08 on site and the noise stayed consistent but the mph fell back to stock 11mph. My carts a little too nice for the kiddos and I'd like to keep it that way and that's why I'm contemplating purchasing this 08 and let them beat it to crap at 1200$.
Sent from my SM-N910V using Tapatalk |
10-06-2015, 02:25 PM | #5 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
Re: 48v G29 slight growl on decel
Bought it today, Ill have some time to get a little deeper into it this evening once my sons soccer game is over. Ill post up some pics a little later.
|
10-06-2015, 04:13 PM | #6 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,171
|
Re: 48v G29 slight growl on decel
as cgtech said CHECK for the white tag axle. This is a known problem with these carts and it's an expensive fix. Easy to check!
|
10-06-2015, 04:46 PM | #7 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
It's got the yellow tag, checked before I paid the man
Sent from my SM-N910V using Tapatalk |
10-07-2015, 10:56 AM | #8 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
Okay so I've got the motor pulled how much play is there supposed to be in the output shaft?
Sent from my SM-N910V using Tapatalk |
10-07-2015, 11:48 AM | #9 |
Not Yet Wild
Join Date: Sep 2015
Location: Panama City Beach
Posts: 26
|
Put the bushing pennies in and the growling is gone!
New issue upon reinstall. The f2 terminal kept spinning and I believe whatever that post makes contact with may have come loose. The motor takes about 5 seconds to engage and when switched to reverse it moves forward also taking forever to engage Sent from my SM-N910V using Tapatalk |
10-07-2015, 11:59 AM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 48v G29 slight growl on decel
Oh no! Motor needs removed and inspection/repair. That was a mistake (allowing it to spin).
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Slight setback.......... | Electric EZGO | |||
low speed growl?? | Electric Club Car | |||
EZ go just stops with slight hum when pedal is down | Electric EZGO | |||
94 CC DS Axle Growl | Electric Club Car |