1992 ClubCar ? on the cable coming out of the black box under seat

cvcman · 04-26-2009, 09:11 AM

what is the purpose of the cable coming out of the black box uner the seat and how much thread should be showing.

I adjusted the gov and it now has more speed but every once in awhile if you have it to the floor it will hit the limiter so I just back off a 1/2" or so and its fine.

Just wondered what that cable does. Also it seem as though where the box mounts the the plastic is cracked so I made an aluminum angle bracket under it to stiffen it up, work well !

scottyb · 04-26-2009, 09:19 AM

Well, not sure but that sounds like the accelerator cable. Where does the other end of go to?

lockman1 · 04-26-2009, 09:30 AM

All you really have to do is, take the cover off to see for yourself!

Linkage from the go petal going in,
Throttle cable going out, (to the govenor arm)
Voltage regulator
Solenoid
Fuse
and micro switches

You could do 2 things if you don't want to hit the rev limiter...
1) readjust your govenor to a lower RPM
2) disconnect the rev limiter ground

If you pick #2, It's crucial that you don't rev over 4200 RPM's for long periods,
your valves will float, and THAT will lead to a problem!

Yes... you could adjust the throttle cable coming from the box,
But, IMO... readjust the govenor!

my .02

04-26-2009, 09:11 AM	#1
cvcman Getting Wild Join Date: Apr 2009 Posts: 87	1992 ClubCar ? on the cable coming out of the black box under seat what is the purpose of the cable coming out of the black box uner the seat and how much thread should be showing. I adjusted the gov and it now has more speed but every once in awhile if you have it to the floor it will hit the limiter so I just back off a 1/2" or so and its fine. Just wondered what that cable does. Also it seem as though where the box mounts the the plastic is cracked so I made an aluminum angle bracket under it to stiffen it up, work well !
cvcman Getting Wild Join Date: Apr 2009 Posts: 87

04-26-2009, 09:30 AM	#3
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,923	Re: 1992 ClubCar ? on the cable coming out of the black box under seat All you really have to do is, take the cover off to see for yourself! Linkage from the go petal going in, Throttle cable going out, (to the govenor arm) Voltage regulator Solenoid Fuse and micro switches You could do 2 things if you don't want to hit the rev limiter... 1) readjust your govenor to a lower RPM 2) disconnect the rev limiter ground If you pick #2, It's crucial that you don't rev over 4200 RPM's for long periods, your valves will float, and THAT will lead to a problem! Yes... you could adjust the throttle cable coming from the box, But, IMO... readjust the govenor! my .02

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
black seat leather	Golf Carts and Parts
black trim for seat	Gas EZGO
Two Tone Custom Black/Red Seat Covers -G22	Golf Carts and Parts
smell of burning plastic coming frombox under seat	Electric EZGO
And The problems keep coming	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-26-2009, 09:19 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: 1992 ClubCar ? on the cable coming out of the black box under seat Well, not sure but that sounds like the accelerator cable. Where does the other end of go to?