1996 g16 controller question

ice329 · 02-17-2013, 12:31 PM

Neibor is looking at a cart, g16 48v. owner says it run 10 min and dies and thinks its a controller. Any thoughts. Is that how a controller acts when its done. Also if it is a controller is there a cheap replacement, even if he needs to do some alterations with fitting it or wiring it. Thanks

camaroluvz28 · 02-25-2013, 08:59 PM

This sounds more like he has one or more batteries that have failed or gotten weak...what year are his batteries?

cgtech · 03-08-2013, 08:02 PM

first problem is G-16e is 36volt, G-19e is 48volt, better be sure what you're dealing with. The throttle, series style controller, F&R, and motor are NOT interchangeable between the 36v G-16 and the 48v G-19. Second problem, Yep sounds like controller. Alltrax AXE (ask for the 0-1k throttle version) controller will work dandy in there. i have taken the old controller out, cut the small wires off at the controller, then , used those wires to make an "a-dapter kit" for plug and play fit.

02-17-2013, 12:31 PM	#1
ice329 Getting Wild Join Date: Jun 2010 Posts: 88	1996 g16 controller question Neibor is looking at a cart, g16 48v. owner says it run 10 min and dies and thinks its a controller. Any thoughts. Is that how a controller acts when its done. Also if it is a controller is there a cheap replacement, even if he needs to do some alterations with fitting it or wiring it. Thanks
ice329 Getting Wild Join Date: Jun 2010 Posts: 88

03-08-2013, 08:02 PM	#3
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 1996 g16 controller question first problem is G-16e is 36volt, G-19e is 48volt, better be sure what you're dealing with. The throttle, series style controller, F&R, and motor are NOT interchangeable between the 36v G-16 and the 48v G-19. Second problem, Yep sounds like controller. Alltrax AXE (ask for the 0-1k throttle version) controller will work dandy in there. i have taken the old controller out, cut the small wires off at the controller, then , used those wires to make an "a-dapter kit" for plug and play fit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
1996 i put pds controller in dcs cart, do damage?	Electric EZGO
1996 club car controller	Electric Club Car
WTB: High Speed Motor and Controller for 1996 48V CC	Golf Carts and Parts
1996 Club Car 48 volt Used Stock Controller	Golf Carts and Parts
Newbie needs HELP!! 1996 48V CC Motor Question	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-25-2013, 08:59 PM	#2
camaroluvz28 Gone Wild Join Date: Sep 2010 Location: Florida Posts: 1,895	This sounds more like he has one or more batteries that have failed or gotten weak...what year are his batteries?