|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-07-2013, 10:03 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
G19E with a part not on the wiring diagram
I have a G19E that is not functioning at all. I have replaces the controller and the relay. I get no relay click or reverse buzzer, and no go either. Facing the front of the cart on the drivers side right in front of the neg end of the battery string there is a "box" bolted to the frame with a black and grey wire coming out of it. I cannot fint this "box" on any of the diagrams I have found. I cant decide if this is my issue of not.
In addition I can only get about 36V to co through the relay. Same voltage to the key and the for/rev switch. Stumped to say the least. Any help is greatly appreciated. P.S. This is my first one so I am totally green at this.  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-07-2013, 10:31 AM
|
#2 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G19E with a part not on the wiring diagram
Is it something that looks like it was added on? Post a pic of what you've got. What's inside the box? Maybe a hidden disable switch? Just guessing...
|
|
|
|
|
11-07-2013, 10:37 AM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
It is an amuninum rectangle bolted to the frame where the serial number tag is. It appears to be plastig or epoxy (black) on the side the wires are coming out of. Probably 2 inches wide and 6 inches tall.
|
|
|
|
|
11-07-2013, 10:46 AM
|
#4 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 4
|
Re: G19E with a part not on the wiring diagram
If its not stock...could be an added voltage converter for 12V accessories???
|
|
|
|
|
11-07-2013, 10:48 AM
|
#5 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
I dont think its an add on, and there is no positive power going into it. Both appear to be grounded......
|
|
|
|
|
11-07-2013, 10:50 AM
|
#6 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
Could it be the buzzer? Where is it located in the compartment?
|
|
|
|
|
11-07-2013, 11:06 AM
|
#7 |
|
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G19E with a part not on the wiring diagram
On a gas cart, the factory buzzer is under the front cowl. About the size of a half dollar, round and black.
|
|
|
|
|
11-07-2013, 11:25 AM
|
#8 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
That is defenitely not it then.
|
|
|
|
|
11-07-2013, 11:39 AM
|
#9 |
|
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
Will a G19E run with the buzzer disconnected?
|
|
|
|
|
11-07-2013, 01:04 PM
|
#10 |
|
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: G19E with a part not on the wiring diagram
Yes it will.
What's the battery pack voltage? |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha G19E Electric Solenoid Wiring Issue | Electric Yamaha | |||
| i have changed every part, and still no go g19E | Electric Yamaha | |||
| Need Wiring Diagram for G19E | Electric Yamaha | |||
| G2 Wiring harness Part # | Gas Yamaha | |||
| melted wiring??! Can this part be replaced? | Gas Yamaha | |||
Linear Mode
