|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-07-2016, 11:06 PM | #1 |
Gone Wild
Join Date: Oct 2013
Posts: 297
|
Marathon a no go
I have 89 marathon with scottyB's solid state conversion. I pulled it in the shop this evening to put my lights on and add a volt meter. I unhooked battery cables to put meter and light wires on. Didn't touch anything else. When I got back in and tried to move, nothing. The solenoid isn't clicking. Where to start? I've already check key switch
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-08-2016, 06:45 AM | #2 |
Guest
Posts: n/a
|
Re: Marathon a no go
look around for a loose wire ... i have lost a few down the side of a battery
test solenoid |
09-08-2016, 07:19 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Marathon a no go
There is a step by step install & troubleshooting guide for this conversion kit on the CU website here > http://www.cartsunlimited.net/troubl...ion-kit--.html
Let us know what you find. |
09-08-2016, 04:29 PM | #4 |
Gone Wild
Join Date: Oct 2013
Posts: 297
|
Re: Marathon a no go
Will do. I appreciate. Scotty, I was going to email you after checking here. I'll go check the site.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
marathon to txt swap exhaust question+marathon steering+snorkle | Clone Engine Swaps | |||
88 marathon carb on 84 marathon | Gas EZGO |