|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-17-2017, 08:05 PM | #1 |
Not Yet Wild
Join Date: May 2008
Posts: 14
|
Reversing Contactor Connection Question
Ok - newbie here again installing a reversing SW202 Contactor - curious as to how I make the connection on the negative tab that is shown in the attached pic - see pointer. Seems that there are two wires occupying the same tab - one across to the other negative tab and the other to the B- connection on the controller - how do I make this connection....both wires in the same terminal or am I way off base?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2017, 09:00 PM | #2 |
Guest
Posts: n/a
|
Re: Reversing Contactor Connection Question
yes it is 2 wires ... it is the negative side of your solenoids activation
see in diagram the positive comes from the f/r switch you can add a piggy back female connector |
01-17-2017, 09:24 PM | #3 |
Not Yet Wild
Join Date: May 2008
Posts: 14
|
Re: Reversing Contactor Connection Question
Thanks CTD!
|
01-17-2017, 10:47 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Reversing Contactor Connection Question
Or simply twist the 2 wires together and put them in the connector
|
01-17-2017, 10:51 PM | #5 |
Guest
Posts: n/a
|
Re: Reversing Contactor Connection Question
|
|
|
Similar Threads | ||||
Thread | Forum | |||
reversing contactor | Electric EZGO | |||
Reversing contactor hot | Electric EZGO | |||
Reversing Contactor?? | Electric EZGO | |||
Reversing Contactor not working? EZGO TXT 48V w/SW202 Contactor. How to test it? | Electric EZGO | |||
reversing a series motor without a reversing contactor? | Electric EZGO |