|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-05-2017, 03:38 PM | #1 |
Not Yet Wild
Join Date: Mar 2017
Posts: 14
|
1997 G16 Lift Questions
Bought this G16 yesterday for a good price. Checking out the lift it looks like the bottom mounts on the rear shocks are in a serious bind. Is this a homemade lift? The diagonal bar on the rear, never seen that on the cart before. What is it? Stock? I'm thinking I'll take this lift off. It's not very stable and the wife and kids will be using it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2017, 03:50 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 1997 G16 Lift Questions
That lift kit is very home made. The bar in the back is called a panhard rod, it's job is to locate the rear suspension. With that steep angle, it would be very unstable on any bumps. Search the site for Jake's lift kits for pics of the modification normally done to keep that bar more level. Even the entry level lift kits are better than that home brew job, but they do use the same method to get lift.
|
03-05-2017, 03:53 PM | #3 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: 1997 G16 Lift Questions
You'd be better off with the cheap 4" lift--actually 5+" in the rear--. That looks homemade to me.
Great minds think alike |
03-05-2017, 04:16 PM | #4 |
Not Yet Wild
Join Date: Mar 2017
Posts: 14
|
Re: 1997 G16 Lift Questions
Thanks. I'm going to take it back down to stock. Will that level the bar on the rear back out like it should? I'm in no real need of a lift yet. Got some other issues to work out first.
|
03-05-2017, 04:32 PM | #5 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: 1997 G16 Lift Questions
You will have to move the right end of the panhard bar to the hole at the end. Should be good after that.
|
03-06-2017, 10:54 PM | #6 |
Not Yet Wild
Join Date: Mar 2017
Posts: 14
|
Re: 1997 G16 Lift Questions
Got the home made lift off and this is the situation on the rear. What's this all about? Driver rear rubbing the bumper. Passenger side is ok.
|
03-07-2017, 12:27 AM | #7 |
Not Yet Wild
Join Date: Mar 2017
Posts: 14
|
Re: 1997 G16 Lift Questions
|
03-07-2017, 07:41 AM | #8 |
Gone Wild
Join Date: Jun 2010
Location: OHIO
Posts: 339
|
Re: 1997 G16 Lift Questions
I have a used Jakes 5" A-Arm lift for sale for a G16 if interested.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1997 TXT Series Cart Electrical Questions | Electric EZGO | |||
Have a questions about reading voltage at motor 1997 G16E | Electric Yamaha | |||
New to me 1997 EZ go questions | Gas EZGO | |||
1997 g16 lift kit | Gas Yamaha | |||
1997 Club Car Newbie Questions | Gas Club Car |