|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-12-2017, 04:19 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 65
|
1.25” roof support windshield clip
Hi gang,
I’m searching high and low for a set of top windshield clips. My front support for my roof measures 1.25”. Everything I’ve seen out there is either made for a 1” or a 3/4”. Will I be okay with a 1”? The style I like has a hard plastic “U” channel that snaps on over the support—but at this point I would probably take anything that I knew would work |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-14-2017, 04:13 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 65
|
Re: 1.25” roof support windshield clip
So I purchased these. But I'm wondering if those of you with an RXV windshield can help to how this piece is attached. Is the rubber clip glued to the acrylic?
 |
|
|
|
|
11-14-2017, 04:14 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 65
|
Re: 1.25” roof support windshield clip
I'm pretty sure it goes like this, but again, not sure of the attachment
 |
|
|
|
|
11-14-2017, 05:42 PM
|
#4 |
|
Gone Wild
 Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: 1.25” roof support windshield clip
Not sure how different it is from a txt, but you shouldn’t have to glue anything. They can be a bit like one of those coffee table mind games, but typically the wide part snaps onto the upright and the smaller part bends out to receive the windshield.
|
|
|
|
|
11-15-2017, 08:15 PM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 65
|
Re: 1.25” roof support windshield clip
After doing a test fit I’m pretty sure mine have to be glued. I don’t see any other way that would make sense for attaching them. Glue should arrive tomorrow to bond the rubber to the acrylic
|
|
|
|
|
11-15-2017, 09:10 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: 1.25” roof support windshield clip
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Windshield Clip | Electric EZGO | |||
| Need windshield clip | Electric EZGO | |||
| Wanted Golf Cart front roof/windshield support | Golf Carts and Parts | |||
| windshield clip glue? | Electric Club Car | |||
| Windshield clip | Electric Club Car | |||
Linear Mode
