F&R Contactor wiring question

tmcdon · 01-31-2021, 07:40 PM

I have upgraded my 96 medalist with 2g cables, 8 6 volt batteries, Alltrax 48500, big solenoid and the solenoid f&r switch. Everything works but I want the F&R contactors to be off when the key is off. They are currently wired to the controller side of the contactor. Where can I wire them from safely that will be off when the key is off?

JohnnieB · 01-31-2021, 09:13 PM

Feed the center (common) terminal of the F/R toggle switch from the red wire on the main solenoid's small terminal.

That terminal should only have B+ on it when key is On and pedal is pushed.

01-31-2021, 07:40 PM	#1
tmcdon Not Yet Wild Join Date: Nov 2020 Posts: 6	F&R Contactor wiring question I have upgraded my 96 medalist with 2g cables, 8 6 volt batteries, Alltrax 48500, big solenoid and the solenoid f&r switch. Everything works but I want the F&R contactors to be off when the key is off. They are currently wired to the controller side of the contactor. Where can I wire them from safely that will be off when the key is off?
tmcdon Not Yet Wild Join Date: Nov 2020 Posts: 6

01-31-2021, 09:13 PM	#2
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: F&R Contactor wiring question Feed the center (common) terminal of the F/R toggle switch from the red wire on the main solenoid's small terminal. That terminal should only have B+ on it when key is On and pedal is pushed.

Similar Threads
Thread	Forum
Reversing contactor wiring options	Electric Club Car
Yamaha Reversing Contactor Wiring	Extreme DC!
Question/Help with SD Solenoid/SD Reverse Contactor/New Controller Wiring	Electric EZGO
Wiring help for Super Duty F/R Contactor	Electric EZGO
contactor wiring	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum