|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-04-2021, 03:13 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 11
|
G2 charging problem. "green wire lowers voltage"
When I try to test the starter generator and voltage reg. as suggested here I get strange results.
When temporarily grounding green wire, I get a voltage decrease of about .5 volts. New S/G red and green wire at 5 ohms No grounds between F1,F2, A1 or A2 to case ground. Cart is running off of battery and won't run long. Any ideas? What baffles me is voltage drop when ground green wire off VR. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-14-2021, 01:53 PM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2021
Posts: 2
|
Re: G2 charging problem. "green wire lowers voltage"
I am having the same issue. Did you by chance get this resolved?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Making a 4 wire Voltage Reducer "keyed"? | Electric Club Car | |||
| no power with green wire connected to voltage regulator | Gas EZGO | |||
| Cart only runs with Voltage Regulator green wire disconnected | Gas EZGO | |||
| what conditions make the "micro-processing timer" decide there's a charging problem? | Electric Club Car | |||
| Where to land "Logic Power" wire after new install | Electric EZGO | |||
Linear Mode
