FE350 Running Without Counterweight

Fairtax4me · 01-25-2021, 09:43 PM

Pretty sure most people leave them open. They’re not very large, but you can weld them shut if you prefer. Just make sure not to overheat the crank or ruin the other bearing surfaces.

CP241 · 01-25-2021, 10:38 PM

I’ve removed the CB once. I left them open and had no issues. I did have a noticeable amount of vibration at lower rpm but it smoothed out a good bit as it revved higher.

01-25-2021, 09:43 PM	#11
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: FE350 Running Without Counterweight Pretty sure most people leave them open. They’re not very large, but you can weld them shut if you prefer. Just make sure not to overheat the crank or ruin the other bearing surfaces.

01-25-2021, 10:38 PM	#12
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,669	Re: FE350 Running Without Counterweight I’ve removed the CB once. I left them open and had no issues. I did have a noticeable amount of vibration at lower rpm but it smoothed out a good bit as it revved higher.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
does this fe350 sound ok?	Gas Club Car
FE350... Stalling Issue	Gas Club Car
96 carryall fe350?	Gas Club Car
fe350 blowing oil into the carb	Gas Club Car
If I was to take my FE290 out and replace it with a FE350	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum