|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-22-2010, 10:11 AM | #11 |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
No I am hoping to go as fast as possible. I don't have the programming kit so I can't do it right now.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-23-2010, 10:02 AM | #12 |
Not Yet Wild
Join Date: Jul 2008
Location: Texas
Posts: 12
|
Re: Alltrax DCX400 Speed and Torque Question
Having the Turbo set to on will not increase top speed. It does drop as much current to the motor as the motor will pull after the throttle is depressed fully for 1 second.
On mine I can spin the tires with turbo on. with turbo off it is just real quick and depends on the throttle up setting. Hope this helps TJ |
11-23-2010, 10:16 AM | #13 |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
Thanks for the info. Will start programming tomorrow.
|
11-24-2010, 07:16 PM | #14 |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
Got it programmed successfully. Took 5 minutes. Just had to move the solenoid, pop off the cover and do it. I had to set the Turbo to on. And turned brake current to 0%. It was on 65%. All the other options were maxed out. Left high pedal disable ON. Put everything back together, got in the cart and it was about 2 miles per hour faster! 10 minutes later, about 5 MPH faster! Great upgrade and hoping to get a DCX600 soon. Thanks for all the help guys! The cart is very fast now and the torque is incredible. I have more plans, as soon as funds allow.
|
11-25-2010, 12:09 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax DCX400 Speed and Torque Question
Can you verify 24mph with turbo on and plug brake off?
|
11-25-2010, 12:14 AM | #16 |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
|
11-26-2010, 12:35 AM | #17 |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
Scotty, I can verify 23 MPH on flat ground with a battery pack at 37.8 volts. Does this sound correct? Not worried about 1 MPH since I am considering a PQ motor.
|
11-26-2010, 12:47 AM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax DCX400 Speed and Torque Question
That sounds right. Actual speed will vary cart to cart. Sounds like you are running good
|
11-26-2010, 12:52 AM | #19 | |
resident idiot
Join Date: Apr 2010
Posts: 582
|
Re: Alltrax DCX400 Speed and Torque Question
Quote:
Thanks Scotty!!! |
|
09-17-2014, 02:22 PM | #20 |
Not Yet Wild
Join Date: Jun 2014
Posts: 4
|
Re: Alltrax DCX400 Speed and Torque Question
I have a yamaha G19 48v with the alltrax dcx 400. I hooked up the controller and programmed it just as stated above and unless Im going down hill (18mph) I seem to only reach stock speeds of 15-16mph. I dont have any brake drag and the batteries are fully charged. any suggestions would be great help thank you.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax DCX400 + Regen? | Electric EZGO | |||
Alltrax DCX400 | Electric EZGO | |||
Alltrax DCX400 PDS Installed On 06 TXT PDS | Electric EZGO | |||
PDS cart with Alltrax DCX400 | Electric EZGO | |||
alltrax DCX400 for sale | Electric Club Car |