|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
01-13-2013, 11:44 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2012
Posts: 26
|
G1 Live Axle conversion.
I had started this in the sled conversion section and was asked to put it up here,Mods if I'm outa line please move it.
I picked up this ragged out G1 cheap.It had no rear end when I got it,but it had a poor attempt at a sled motor install.So I'm pretty much starting from scratch.This is where I'm at so far. Sorry about the bad pics I took them on my phone. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-13-2013, 11:56 AM
|
#2 |
|
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1 Live Axle conversion.
Welcome to the site. Very cool build you have there.
|
|
|
|
|
01-13-2013, 01:24 PM
|
#3 |
|
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: G1 Live Axle conversion.
Welcome! Been a while since I've seen a live axle build. Keep the pics coming.
|
|
|
|
|
01-13-2013, 02:20 PM
|
#4 |
|
Gone Wild
Join Date: Sep 2011
Location: Flint Mi.
Posts: 248
|
Re: G1 Live Axle conversion.
Welcome to the G1's group.
That is a real good way of getting a very strong rear axial. woomm!  Grate workmen ship! please keep pitchers coming please. cant ware to you what comes next! |
|
|
|
|
01-13-2013, 08:40 PM
|
#5 |
|
Not Yet Wild
Join Date: Nov 2012
Posts: 26
|
Re: G1 Live Axle conversion.
Thanks guys,I set the swing arm in the frame and have a couple of issues. First the secondary clutch hits the rear cross member, I hate to but I think I'm going to have to relocate the cross member.
Next problem was the motor just clears the body.When the springs compress the motor will contact the body. I have a couple of Ideas to get around both these issues. The hard work except for the exhaust is done,now I have a bunch of little things to address. As a side note moving the axle under the swing arm with the pillow block I got an instant 6 in. lift. |
|
|
|
|
01-14-2013, 08:13 AM
|
#6 |
|
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: G1 Live Axle conversion.
Nice build. Keep the pics comin'.
|
|
|
|
|
05-07-2018, 05:31 AM
|
#7 |
|
Not Yet Wild
Join Date: May 2018
Location: Medina, ohio
Posts: 2
|
Re: G1 Live Axle conversion.
I know this is an old post, but any chance you have a parts list for this build?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| axle talk.live axle what one | Bike & ATV Engine Swaps | |||
| Live axle question | Sled Engine Swaps | |||
| non steer axle conversion to steer axle | Lifted Golf Carts | |||
| 1991 G2 question. axle conversion | Gas Yamaha | |||
| Live Axle For Lifted Marathon | Gas EZGO | |||
Linear Mode
