|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-12-2014, 10:15 PM | #11 |
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: gas in oil
other than fuel in oil is the cart running good?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2014, 11:06 AM | #12 |
Getting Wild
Join Date: Jul 2010
Posts: 119
|
Re: gas in oil
There is no float adjustment and the float isn't sitting right.. on either carb. I heated and bend the valve tab on the old float to see if that works better.. see what happens.
|
04-13-2014, 11:09 AM | #13 |
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: gas in oil
if you turn carb upside down float should be level/flat
|
04-13-2014, 11:12 AM | #14 |
Getting Wild
Join Date: Jul 2010
Posts: 119
|
Re: gas in oil
Yes. and the float was angled down on my old and new carb. I heated and bend the tab on the old plastic float to adjust it.
With no adjustment on the plastic float, what are you supposed to do? |
04-13-2014, 11:52 AM | #15 |
Getting Wild
Join Date: Jul 2010
Posts: 119
|
Re: gas in oil
I'll update later once I get this thing back together.
|
04-13-2014, 11:53 AM | #16 |
Getting Wild
Join Date: Jul 2010
Posts: 119
|
Re: gas in oil
Sorry. I had to post my 100th post since I was so close. :)
|
04-13-2014, 12:01 PM | #17 |
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: gas in oil
I'm not sure but you might be able to bend metal tang that rests on needle valve?
|
04-14-2014, 12:23 AM | #18 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: gas in oil
Some had completely plastic float (white plastic, zero metal), none were really intended to be adjusted, but, sometimes you gotta do what you gotta do.
|
04-14-2014, 09:57 AM | #19 |
Getting Wild
Join Date: Jul 2010
Posts: 119
|
Re: gas in oil
I ran it for the day. I can't tell if the oil smells yet. (was sniffing fumes all day yesterday). Now I'm on a power shortage on both low and high end.
I went through a ditch pretty fast and it seems like I lost fuel for a bit and it stalled out and wouldn't run for 5 min. Think that has to do withmy float adjustment? I should have taken photos. |
04-14-2014, 02:20 PM | #20 |
Gone Wild
Join Date: Mar 2014
Location: S.W. Florida
Posts: 302
|
Re: gas in oil
I never had luck messing with the floats I always mess up those tiny parts I never herd of adjusting the float? do you want it to stop the gas sooner so the bowl isn't as full
|