|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-18-2016, 08:25 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 5
|
Hitachi 2 wire df / starts no charge
Is it true that if it crAnks , it will charge
My ezgo crNks runs but no charge. Whats the deal with two df wires. Is red just get capped and green to vr ? The generator did not charge when field grounded. Im assuming bad generator , but another post claimed that if it crAnks it will charge . My starter does not look burnt , is fairly new , But smells- should I assume i need rebuilt ? ThAnks !! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-20-2016, 04:29 PM | #2 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: Hitachi 2 wire df / starts no charge
If you ground the green wire from the generator it should charge. Unplug it from the regulator and touch to a good ground with a volt meter on the battery.
|
06-21-2016, 04:47 AM | #3 |
Not Yet Wild
Join Date: Jun 2016
Posts: 5
|
Re: Hitachi 2 wire df / starts no charge
Thanks for reply!
I got that part figured out from all the good tech here. Every schematic drawn shows a one wire df. I took the generator to a starter shop . i watched six guys scratch their head as to how to check. After multiple diagrams, they got it. The genstarter is wrong to my cart . bUT , they told me thAt if I reinstall it and provide 12 v to the red wire from df AND ground green field , ill get full power. came home reinstalled , and magically , i had 14 volts at battery. It works great now. I wired the red to solenoid 12v from pedal switch and it charges great! So all this time , ive had wrong generator/starter in the cart. |
06-21-2016, 04:53 AM | #4 |
Not Yet Wild
Join Date: Jun 2016
Posts: 5
|
Re: Hitachi 2 wire df / starts no charge
They even gave me a reverse heavy duty vr that would last
longer than the cheesy solid state one thats oem. I tried it and got 14.5 instead of 14 at a lower rpm. At highest rom it did not exceed 14.5 , so im good. So how do I make this thing faster now :) There is not one ezgo schematic that i could find that showed a 2 wire df . Hopefully this post helps someone.. |
06-21-2016, 04:55 AM | #5 |
Not Yet Wild
Join Date: Jun 2016
Posts: 5
|
Re: Hitachi 2 wire df / starts no charge
The gen/starter
|
06-21-2016, 04:57 AM | #6 |
Not Yet Wild
Join Date: Jun 2016
Posts: 5
|
Re: Hitachi 2 wire df / starts no charge
The gen/starter
The 2 wire df reslky threw me off |
|
|
Similar Threads | ||||
Thread | Forum | |||
F/W and charge wire connection help | Electric Club Car | |||
Help! My Yama G16A starts but doesn't charge? | Gas Yamaha | |||
EZ-GO PDS- charge wire getting hot | Electric EZGO | |||
2 wire charge meter hot wire to F&R witch? | Electric EZGO | |||
Charge wire through computer | Electric Club Car |