06-30-2016, 10:48 AM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 2
|
EZ Go won't go
My EZ Go (approx. year is '05) will start and run and I can see the belt get squeezed, but it will not move forward or reverse.......Any ideas on what would cause this would be appreciated..DBak
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2016, 03:34 PM | #2 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: EZ Go won't go
check both your rear hubs, may have bad splines in hub,stripped out. also make sure your shiftier on transaxel is rotating when shifting from fwd/rev.
|
06-30-2016, 04:13 PM | #3 |
Not Yet Wild
Join Date: Jun 2016
Posts: 2
|
Re: EZ Go won't go
thank you..........I was wondering if it may be the transmission and if it had some kind of spline in it that may have wore out..
|
06-30-2016, 04:32 PM | #4 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: EZ Go won't go
not likely the transmission, not heard of many problems with them.
|