|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-24-2016, 09:17 PM | #1 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
89 gas marathon transaxle bearings
I'm currently trying to breathe life into a very tired and wore out 89 marathon which has turned into a full out restoration. I'm noticing the input shaft on the transaxle has some wiggle to it which I'm sure will only get worse with time. I have the service manual for the axle and have many years of building 2 and 4 stroke dirtbike engines for my son, I'm comfortable with tearing into this thing but thought it wouldn't hurt to see if anyone had any additional advice that might be helpful. I do have a spare axle that has stripped gears that I may do an exploratory tear down on first.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2016, 07:06 PM | #2 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
Re: 89 gas marathon transaxle bearings
For those who don't have an internal bearing puller for pulling bearings from a blind hole on an 89 Ezgo gasser I discovered that a 1/2" drop in concrete wedge anchor, piece of threaded rod with nut and washer works like a charm. Now that I did an exploratory tear down on my spare junker it's time to tear my good one down and replace all the bearings.
|
09-27-2016, 07:07 PM | #3 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
Re: 89 gas marathon transaxle bearings
Another view
|
10-02-2016, 02:45 PM | #4 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
Re: 89 gas marathon transaxle bearings
Bearings are changed and axle is ready to install, I think I worried more than I should have, wasn't bad at all. This was the last rebuild item on the list so now onto body work and making this girl pretty.
|
10-02-2016, 03:51 PM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 89 gas marathon transaxle bearings
Nice job. Yeah there not that hard to rebuild
This might of helped out http://www.buggiesgonewild.com/elect...tml#post658807 |
|
|
Similar Threads | ||||
Thread | Forum | |||
98 Ezgo transaxle on an 88 marathon for big block swap | Big Block Talk! | |||
1989 Marathon transaxle | Gas EZGO | |||
Sealed bearings in the transaxle? | Electric Club Car | |||
Greasing bearings front bearings/ Bearing Buddies? | Gas EZGO | |||
Transaxle Swap/Yamaha Transaxle, Good Deal? | Lifted Golf Carts |