Checking timing without removing clutch possible?

Brandon H. · 10-20-2016, 08:56 PM

Have a 295 on a 95 EZGO TXT. We are getting it fine tuned and the bugs worked out. It had no power going on flat ground would move under 4-5mph. Got a new carb and fuel pump, we wanted to check the timing and adjust the valves.

Is there any way to verify timing without tearing off the clutch? Or can a compression gauge or leakdown tester confirm if its where it should be?nwe can get it as close to TDC as possible.

Thanks guy, we have 3 weeks untill vacation got to get this sorted out. Can rebuild a small block chevy with my eyes closed but these little things freak me out a little

10-20-2016, 08:56 PM	#1
Brandon H. Not Yet Wild Join Date: Oct 2016 Posts: 6	Checking timing without removing clutch possible? Have a 295 on a 95 EZGO TXT. We are getting it fine tuned and the bugs worked out. It had no power going on flat ground would move under 4-5mph. Got a new carb and fuel pump, we wanted to check the timing and adjust the valves. Is there any way to verify timing without tearing off the clutch? Or can a compression gauge or leakdown tester confirm if its where it should be?nwe can get it as close to TDC as possible. Thanks guy, we have 3 weeks untill vacation got to get this sorted out. Can rebuild a small block chevy with my eyes closed but these little things freak me out a little
Brandon H. Not Yet Wild Join Date: Oct 2016 Posts: 6

Similar Threads
Thread	Forum
Replace Drive Clutch Spring Without Removing Clutch?	Gas EZGO
Help removing Clutch	Gas EZGO
Help removing driven clutch	Gas EZGO
Removing Clutch on G29	Gas Yamaha
Removing the clutch	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum