06 EZGO TXT No Movement. Elec problem

jason1980 · 05-31-2017, 01:36 PM

KGSC,
Thanks! I will start tracing and come back with the results. Sure would be nice to determine what it is.

jason1980 · 05-31-2017, 08:42 PM

I'm checking the high volt circuit with volt meter.
With ig switch on, I've got 41 v on batt pack
On solenoid side towards pos batt post I read 41 on solenoid post
But I don't think the next part is right?
I'm reading 40.4 v on the opposite side of solenoid without pressing the pedal?
Then when I press the pedal down it starts to drop.
Is that right?

jason1980 · 05-31-2017, 08:55 PM

Also I'm reading 40.4 v on the b + post on the controller with no pedal pressed at all

mgray70 · 05-31-2017, 09:31 PM

Quote:

Originally Posted by jason1980

I'm checking the high volt circuit with volt meter.
With ig switch on, I've got 41 v on batt pack
On solenoid side towards pos batt post I read 41 on solenoid post
But I don't think the next part is right?
I'm reading 40.4 v on the opposite side of solenoid without pressing the pedal?
Then when I press the pedal down it starts to drop.
Is that right?

The voltage on both sides of the solenoid without pressing the pedal is normal. That is the pre charge resistor. When out drops on the controller side when you press the pedal indicates that the solenoid has failed to make contact when closed. Sounds like a bad solenoid. Jump the large post and give it a try.

Sent from my SM-G930R4 using Tapatalk

jason1980 · 05-31-2017, 09:37 PM

Holy shiznit. Jumped the two large posts pushed pedal and SHES ALIVE. It moved

mgray70 · 05-31-2017, 09:41 PM

Quote:

Originally Posted by jason1980

Holy shiznit. Jumped the two large posts pushed pedal and SHES ALIVE. It moved

bad solenoid! 👍

Sent from my SM-G930R4 using Tapatalk

jason1980 · 05-31-2017, 09:51 PM

Thank you so much Mgray70!

05-31-2017, 01:36 PM	#21
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14	Re: 06 EZGO TXT No Movement. Elec problem KGSC, Thanks! I will start tracing and come back with the results. Sure would be nice to determine what it is.
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14

05-31-2017, 08:42 PM	#22
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14	Re: 06 EZGO TXT No Movement. Elec problem I'm checking the high volt circuit with volt meter. With ig switch on, I've got 41 v on batt pack On solenoid side towards pos batt post I read 41 on solenoid post But I don't think the next part is right? I'm reading 40.4 v on the opposite side of solenoid without pressing the pedal? Then when I press the pedal down it starts to drop. Is that right?
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14

05-31-2017, 08:55 PM	#23
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14	Re: 06 EZGO TXT No Movement. Elec problem Also I'm reading 40.4 v on the b + post on the controller with no pedal pressed at all
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14

05-31-2017, 09:37 PM	#25
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14	Re: 06 EZGO TXT No Movement. Elec problem Holy shiznit. Jumped the two large posts pushed pedal and SHES ALIVE. It moved
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14

05-31-2017, 09:51 PM	#27
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14	Re: 06 EZGO TXT No Movement. Elec problem Thank you so much Mgray70!
jason1980 Not Yet Wild Join Date: May 2017 Posts: 14

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
G14e problem-no movement	Electric Yamaha
2007 ruff and tuff / ez go elec problem	Electric EZGO
Random movement problem	Electric Club Car
1990 ezgo elec problem going	Electric EZGO
ezgo C401 elec problem HELP	Electric EZGO