|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-02-2018, 03:48 PM | #1 |
Not Yet Wild
Join Date: Feb 2013
Posts: 63
|
G29 Drive seat back bolts stuck
I'm stripping my recently purchased 07 Drive down and the seat back has two bolts that are stuck. They turn easy in both directions...obviously not engaged in the embedded nuts. I've tried grabbing them with vice groups and pulling and turning, but they won't budge. Any idea how to fix this without cutting them off?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2018, 04:19 PM | #2 |
Gone Wild
Join Date: Jun 2013
Posts: 427
|
Re: G29 Drive seat back bolts stuck
If I remember correctly from when I did my seat upholstery. I think they are “like” T-Nuts inside the seat itself. May have to drill it out like you do to re-rivet something. Not sure that helps at all.
Last edited by frankthetank; 07-02-2018 at 04:21 PM.. Reason: Added like |
07-03-2018, 06:43 AM | #3 |
Not Yet Wild
Join Date: Feb 2013
Posts: 63
|
Re: G29 Drive seat back bolts stuck
You're not telling me what I want hear, Frank! Thanks, though. Hopefully someone else will weigh in with an easier solution.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Torx bolts stuck in bagwell floor. | Electric Club Car | |||
A-arm bolts stuck! | Gas Yamaha | |||
Yamaha Drive Front Seat Back Cap Help | Electric Yamaha | |||
Control arm bolts stuck, please help! | Gas Yamaha | |||
Stuck Back Driver Side Wheel Drum | Electric Club Car |