02-14-2019, 10:23 AM | #1 |
Not Yet Wild
Join Date: May 2018
Posts: 24
|
Drive clutch cover removal
I’m going to be pulling the drive cover off my 2002 Club Car DS I already have the clutch off and a three bolt puller, Any one know what size the three threaded holes are in the cover it’s self, 5/16 “ ? Maybe just guessing though can anyone confirm.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-14-2019, 10:43 AM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Drive clutch cover removal
They're 5/16-18 thread. Usually full of dirt and crud so if you can run a tap through them first to clean them out.
Usually doesn't take much to get the cover to pop off, but make sure the bolts thread in at least 1/2" because you can pull the threads out if you only get 2-3 threads in. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drive clutch cover removal | Gas EZGO | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
Clutch dust cover removal | Gas Club Car | |||
Clutch cover removal | Gas Yamaha | |||
drive clutch cover removal | Gas Club Car |