|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-02-2019, 09:26 AM | #1 |
Not Yet Wild
Join Date: Mar 2019
Posts: 1
|
RXV Danaher help
I recently started a Navitas controller upgrade and while extremely mechanically inclined, I didn’t get enough photos. The resistor has some wires connected to it from the piece I also attached a photo of. If anyone has any photos that show how this was wired, specifically the black and white wire it would surely help me to finish this project.
Thank you from Florida! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-02-2019, 02:31 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV Danaher help
Black wire goes to controller B- terminal, white wire goes to one side of the resistor.
|
07-17-2019, 07:05 PM | #3 |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: RXV Danaher help
The white wire goes to the resistor ...where does the other side attach too?? Ty
Sent from my SM-N960U using Tapatalk |
07-17-2019, 07:21 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV Danaher help
Resistor control module "black wire" goes to controller B- terminal, RCM "white wire" goes to resistor. Other resistor terminal goes to controller B+. Does Navitas reuse the Resistor Controller Module?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rxv Danaher help | Electric EZGO | |||
Danaher rxv 48v controller | Golf Carts and Parts | |||
RXV Danaher controller | Golf Carts and Parts | |||
E-Z-GO Danaher Controller | Golf Carts and Parts | |||
E-Z-GO RXV Danaher Programmer | Golf Carts and Parts |