|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-07-2019, 09:33 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 4
|
yamaha g16 flywheel shroud
How to i get the bottom bolt out to remove the flywheel shroud? If i go in from the side i hit the shroud and the tubing for the platform to hold engine an thr bottom theres a skid plate riveted on
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-07-2019, 10:23 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,823
|
Re: yamaha g16 flywheel shroud
You take the engine loose from the mounting plate. It may seem intimidating and time/labor intensive, but much quicker and easier by taking the engine loose.
|
|
|
|
06-08-2019, 11:45 PM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: yamaha g16 flywheel shroud
I just use a 1/4" drive extension with a swivel at the end, with short 10mm socket. Its not the easiest bolt I ever dealt with, but far from the worst. Never really had that much trouble with it. I have never loosened the motor to do the job.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha g2 flywheel | Gas Yamaha | |||
| Air shroud cover cracked on 2008 yamaha g29 | Gas Yamaha | |||
| Yamaha jG5 Engine shroud | Golf Carts and Parts | |||
| WTB Vanguard Shroud or shorter flywheel fan! | Golf Carts and Parts | |||
| aftermarket or custom flywheel shroud deflector | Gas EZGO | |||
Linear Mode
