|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-08-2019, 04:53 PM | #1 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
2010 EZGO PDS Curtis 1268 Upgrade problems
Hey guys, I have been having some trouble with my Curtis 1268 500amp upgrade in my EZGO PDS. I got the controller for cheap and was able to find a wiring harness for it luckily. I initially had issues with the walkaway relay plug but Sergio help me out with the wiring of that and now everting is wired up and looks good, but I知 getting a low voltage error code 2,1 from the controller and now I literally don稚 know where to go. I have purchased the controller, harness, and 36v/500amp Relay and I知 almost into it as much as a new controller. Please help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-08-2019, 08:55 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2010 EZGO PDS Curtis 1268 Upgrade problems
The controller could be currently adjusted for 48v?
|
11-09-2019, 10:33 AM | #3 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Re: 2010 EZGO PDS Curtis 1268 Upgrade problems
Whenever I spoke to FSIP and Curtis, they say the controller automatically detects 36v or 48v so I知 confused. My battery pack is showing 38.9v
|
11-09-2019, 12:03 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: 2010 EZGO PDS Curtis 1268 Upgrade problems
It will detect it and work on either but there is a low voltage cutoff setting. That might be set for a 48 volt cart. You need a handheld at this point or build yourself a programming cable. And you said you were in the Cumming GA area? You are near the Master of Curtis controllers Mr Bob Boyce in Tn. Send a PM to usgicollector and see if he can put you in touch with Bob.
|
11-10-2019, 01:09 PM | #5 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Re: 2010 EZGO PDS Curtis 1268 Upgrade problems
Thank you KGSC, you helped me when I was going through the relay issues as well. I appreciate it. Should have never tried to go the cheap route on this whole thing, but I can tell you it was on a 48v EZGO before mine so that most likely is the issue. Wish I had the money to go ahead and convert to 48v, but I知 not there yet. I値l reach out to see if I can get in touch with Bob and maybe make a separate post to see if anyone has a programmer in Atlanta.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO 36v PDS Curtis 1268 conversion question. | Extreme DC! | |||
Navitas or Curtis Controller Upgrade for 2010 EZGO RXV | Electric EZGO | |||
Curtis 1268-5411 in 2012 Ezgo Express S6 - Tired of getting passed by teenage girls. | Electric golf carts | |||
I2 Excel upgrade to Curtis 1268 Controller Problems | Electric Club Car | |||
Please help me identify the motor on my 2010 Tomberlin Emerge 48ss (Curtis 1268) | Tomberlin |