|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-05-2021, 12:26 AM | #1 |
Not Yet Wild
Join Date: Jul 2021
Posts: 14
|
2007 ezgo 295cc piston question
Hey guys, I took apart my engine and discovered one of the connecting rods in pieces on the bottom of the crankcase , I'm going to order a new piston and such and wondering what one to order. 2007 ezgo with 295cc. I'm looking on websites and they mention .25 and .50 oversize but I'm not sure which one to get. On top it's stamped df and bf and on the side stamped Hf3.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-05-2021, 08:01 AM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: 2007 ezgo 295cc piston question
Unless you are actually going to bore your engine to .25mm, or .50mm oversize, you would get a standard piston.
You would also bore both cylinders. Not just one. |
07-05-2021, 11:16 AM | #3 |
Not Yet Wild
Join Date: Jul 2021
Posts: 14
|
Re: 2007 ezgo 295cc piston question
I was just making sure it hasn't been bored before because I heard they stamp something on top of the piston if so. Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 ezgo workhorse 295cc no compression | Gas EZGO | |||
295cc Piston ring question | Gas EZGO | |||
1998 ezgo txt 295cc pre mci carb question. | Gas EZGO | |||
295cc piston clearance | Gas EZGO | |||
EZ GO 295cc piston and rod wanted | Golf Carts and Parts |