|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-10-2021, 09:57 PM | #1 |
Not Yet Wild
Join Date: Apr 2014
Posts: 27
|
Where can I find a plug for ignitor
I have a ‘99 ezgo gas cart with a Robin 295cc gas engine.
I have replaced the engine and it won’t start. Coil and pulser check out per the user manual I downloaded. I have installed new plugs. I have polished all connection points and checked all the grounds I could find. I had to route two wires around the plug that slides on the igniter connector because wires were broken off. The engine turns over, so that wiring system checks out ok. I installed a new ignitor. I wasn’t able to find an OEM ignitor, so purchased a Taiwan product that has a good reputation. The plug that slides onto the ignitor’s plastic plug is suspicious. I also am suspicious of the slide-on plug for the pulser. Does anyone know where I can find these plugs? I think they are called “molex” plugs |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
molex connectors, plugs |
|
|
Similar Threads | ||||
Thread | Forum | |||
Front hub needed badly | Electric EZGO | |||
Brake help info needed badly. | Gas EZGO | |||
G8E Service / Repair Manual Needed BADLY Please! | Electric Yamaha | |||
G8 Service / Repair Manual NEEDED Badly Please! | Gas Yamaha | |||
Club Car Gas Engin BADLY Needed | Golf Carts and Parts |