|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-20-2010, 10:55 AM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 7
|
EZGO pds controller help
I have a 2007 ezgo pds with a 6" lift and 22" tires and a rear flip back seat. I want more torque so i was wanting to put 4 gauge cables and a solenoid for now and in a couple of weeks a 500 amp alltraxx controller and leave the motor stock for now! What solenoid do i need and what do you all recommend. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2010, 11:48 AM | #2 |
Not Yet Wild
Join Date: Sep 2010
Posts: 7
|
Re: EZGO pds controller help
Ok I got part of it ordered, I just ordered a set of 2 ga cables and a solenoid with a 400 amp continuous and 600 amp surge I hope I am heading in the right direction
|
09-20-2010, 11:53 AM | #3 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: EZGO pds controller help
You are, if you got the 500amp controller you would need to replace the motor, or get it upgraded.
|
09-20-2010, 12:09 PM | #4 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: EZGO pds controller help
400 amp is fine for the stock motor
|
09-20-2010, 12:12 PM | #5 | |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: EZGO pds controller help
Quote:
|
|
09-20-2010, 12:43 PM | #6 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: EZGO pds controller help
You'll like that. I have the 07 PDS, 4 ga cables, 400 amp controller, and it ran really nice with lots of torque. Now, with the 48 volt upgrade, the stock motor will almost pull the front end off the ground. Well, it will unload the front suspension.
|
09-20-2010, 12:44 PM | #7 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: EZGO pds controller help
Put those sticks in the back and try it then Randy!
|
09-20-2010, 12:59 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: EZGO pds controller help
That's a good question...... some say the motor won't last with access to 500 amps but, others say there isn't really 500 available in a GC battery pack?
Most agree your motor won't last forever running on a 500a controller, but nobody says how long it will last? The same is said of running your 36v motor on 48v ... but again, we have no clear time or limit as to how long they will last. Some of us have run 36v motors on 48v for 2 years without problems. |
|
|
Similar Threads | ||||
Thread | Forum | |||
looking for ezgo solid state controller for 90 ezgo | Electric EZGO | |||
ezgo 400 amp controller, go sometimes. why? | Electric EZGO | |||
I need a 36 v controller for 94 EZGO | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
Where 2 get EZGO DCS controller? | Electric EZGO |