|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-16-2012, 12:42 PM | #1 |
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Where to pull 12V from
I have a 2000 CC DS, 48V.
I want to add several 12 volt accessories, radio, taillights, turn signals some led's etc. I was think about putting in a 4 or 6 circuit fuse panel. Where is the best 12v source? I suppose with the key in the on position. this cart has factory looking headlights with a nice loom, the headlights are ge 886 which is 12.8V, I looked at the wire diagram but can't figure it out. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2012, 01:28 PM | #2 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Where to pull 12V from
The BEST place to get 12v for accessories is via a 48v to 12v voltage reducer/converter that is wired to the entire 48v pack . . .
|
04-16-2012, 01:45 PM | #3 |
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Re: Where to pull 12V from
Steve, I was looking for the 12V source because I saw the lights, so I assumed there it was hiding.
Noooo they just jumped the light to one battery. So now I see the need for a converter. |
04-16-2012, 01:59 PM | #4 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Where to pull 12V from
|
04-16-2012, 03:07 PM | #6 | |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Where to pull 12V from
Quote:
|
|
04-16-2012, 03:42 PM | #8 |
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Re: Where to pull 12V from
What can a radio and led head/tail lights draw?
|
04-17-2012, 06:16 AM | #9 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Where to pull 12V from
|
04-17-2012, 06:23 AM | #10 |
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Re: Where to pull 12V from
Ok, but I can get two 10 amp units for $40, may be able to split the load that way?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
What do I have to do to pull the cam out? | Big Block Talk! | |||
84 G1 solenoids won't pull in | Gas Yamaha | |||
Wont Pull itself | Electric EZGO | |||
Pic from the Pull | Members Rides | |||
what is the most i could pull | Gas EZGO |