84 DS Resistor Cart no clicking and no movement

opps

[DirtinLa]

GRRRR laughing... the yellow speed switch wire is now back to the 36V terminal?

Guess it doesn't matter cause it doesn't work either way

So seems I have a solid 37.8 volts going into the switch and nothing coming out of the

switch... and this is a brand new F/R switch... I have tested and bypassed the micro switch and it's working fine...

can someone tell what my raw voltages should be off the switch?

I am gettig the required 36 & 18 going in at the bottom and nothing going out to the motor?

[Budule]

Originally Posted by crash test dummy

i updated Budule diagram ... this is with looking at a 85 club car and following cables ....if i'm wrong please let me know

mine is a little different , (its a vglide though) .......im getting ready to switch bodys here in a few minutes so I will take some pics ......the motor (red and black ) on the right side are the same , my battery positive and hald speed revers look opposite of that ....the yellow off the micro switch goes to my solenoid...the left bottom lug on mine has the key switch (red) charge port and battery 36 volt....

the color diagram i posted is from a club car service manual 84~85 it shows the speed limit switches to the main battery lug on the f/r switch


as for your problem .. i'd recheck your wires and connections

Originally Posted by Budule

mine is a little different , (its a vglide though) .......im getting ready to switch bodys here in a few minutes so I will take some pics ......the motor (red and black ) on the right side are the same , my battery positive and hald speed revers look opposite of that ....the yellow off the micro switch goes to my solenoid...the left bottom lug on mine has the key switch (red) charge port and battery 36 volt....

yes V-glide is a little dif ... i don't think yours should include the v-glide years

[DirtinLa]

No V glide here

fixing to do a solenoid check on 5 brand new solenoids

[Budule]

Still shouldn't there be something going to the charge port ?

[Budule]

Originally Posted by DirtinLa

No V glide here

fixing to do a solenoid check on 5 brand new solenoids

you only need to worry about the first one which is the "master" .....get power there and the rest should follow.....

Originally Posted by Budule

Still shouldn't there be something going to the charge port ?

ok to end all speculation , i went and photographed a 84 cc ds
see attachments ... they are not the right colors but it shows the following



mods could you remove the wrong diagrams from posts above ?

[Budule]

Pretty close to the vglide setup......the white one on the rotater goes to the solenoid on mine