Alltrax 500A controller...cant get 100% throttle

cummerpt · 07-31-2011, 11:18 AM

I just installed a new Alltrax 500iq and had to do some testing with it to get it from bucking like a bronco. It seems to start off pretty good now, but i cant seem to get above around 88% throttle running the software. With the stock controller, i was getting around 28-30mph on gps. Now im topping out around 26mph. Any ideas?

scottyb · 07-31-2011, 12:08 PM

Are you sure you have the correct throttle selected .... and 100% output selected?

cummerpt · 07-31-2011, 01:23 PM

I have Club Car 5k-0, 100% throttle and turbo selected. Anything im missing?

scottyb · 07-31-2011, 01:27 PM

You didn't say what year your cart is but I'm betting you have the MCOR throttle.

Go back into the program and select MCOR throttle device.

cummerpt · 07-31-2011, 01:54 PM

Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)

sonicj · 07-31-2011, 02:28 PM

how much deadband do you have before the software starts to show throttle movement?

Golfdog · 07-31-2011, 02:44 PM

Quote:

Originally Posted by cummerpt

Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)

On the Control Panel page have you ticked the switch box marked Turbo. This gives extra speed once 100% is reached, provided you are not over current.

cummerpt · 07-31-2011, 02:57 PM

Yes i do have that checked...but the problem is that I cant get to 100% throttle. Pedal to the floor only registers as around 88% on the controller. Is there a way of adjusting the pedal/MCOR?

gaminde · 07-31-2011, 03:01 PM

put you ohm meter across the mcor output and see if its giving full output first then you can pin down the problem.

TDAWG · 07-31-2011, 04:03 PM

Quote:

Originally Posted by cummerpt

Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)

Im sure someone asked this already but do you have a 2008 Precedent IQ, or a 2008 Precedent i2? On the IQ, the stock controller would have been black. On the i2, the stock controller would have been gray.

07-31-2011, 11:18 AM	#1
cummerpt Not Yet Wild Join Date: Jul 2011 Location: Jax Posts: 15	Alltrax 500A controller...cant get 100% throttle I just installed a new Alltrax 500iq and had to do some testing with it to get it from bucking like a bronco. It seems to start off pretty good now, but i cant seem to get above around 88% throttle running the software. With the stock controller, i was getting around 28-30mph on gps. Now im topping out around 26mph. Any ideas?

07-31-2011, 12:08 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax 500A controller...cant get 100% throttle Are you sure you have the correct throttle selected .... and 100% output selected?

07-31-2011, 01:23 PM	#3
cummerpt Not Yet Wild Join Date: Jul 2011 Location: Jax Posts: 15	Re: Alltrax 500A controller...cant get 100% throttle I have Club Car 5k-0, 100% throttle and turbo selected. Anything im missing?

07-31-2011, 01:27 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax 500A controller...cant get 100% throttle You didn't say what year your cart is but I'm betting you have the MCOR throttle. Go back into the program and select MCOR throttle device.

07-31-2011, 01:54 PM	#5
cummerpt Not Yet Wild Join Date: Jul 2011 Location: Jax Posts: 15	Re: Alltrax 500A controller...cant get 100% throttle Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-31-2011, 02:28 PM	#6
sonicj Gone Wild Join Date: Oct 2010 Location: Panama City, FL Posts: 1,408	Re: Alltrax 500A controller...cant get 100% throttle how much deadband do you have before the software starts to show throttle movement?

07-31-2011, 02:57 PM	#8
cummerpt Not Yet Wild Join Date: Jul 2011 Location: Jax Posts: 15	Re: Alltrax 500A controller...cant get 100% throttle Yes i do have that checked...but the problem is that I cant get to 100% throttle. Pedal to the floor only registers as around 88% on the controller. Is there a way of adjusting the pedal/MCOR?

07-31-2011, 03:01 PM	#9
gaminde Gone Wild Join Date: Apr 2011 Location: Texas Posts: 600	Re: Alltrax 500A controller...cant get 100% throttle put you ohm meter across the mcor output and see if its giving full output first then you can pin down the problem.

Similar Threads
Thread	Forum
Controller upgrade question? 500A or 650A	Electric EZGO
Fs: alltrax 500a for parts	Golf Carts and Parts
Getting ready for 36v/48v conversion & 500a Controller etc install	Electric EZGO
Will I see much difference in a 500a from a 400a controller?	Electric EZGO
'02 PDS - do I need a 500A controller?	Electric EZGO