starter solenoid testing

[BrJohnH]

I purchased a new starter solenoid for my '88 Club Car and cracked the shell under one of the small terminals. I've removed it from the cart. Is there any way to test this outside of the normal cart wiring? (if it works, I'm going to epoxy the crack to protect the solenoid). Thanks!!

[DOOmsman]

Two jumper wires to the small terminals
from a 12 volt source and it should click.
Test across the large terminals for continuity
with your ohmmeter.


Use a high temp epoxy.

[BrJohnH]

Thanks, DOOmsman!