93 ezgo wont move

[47dodge]

Have a 93 ezgo it stopped working. I put a jumper between the two big posts on the solenoid mashed the throttle and it moved so I replaced the solenoid. Now it is the same if you jump it, the cart will move with the pedal. Don't really know where to go now, batteries are up good connections are clean. Please help

[NoBullBarry]

Put volt meter across small posts on solenoid. With pedal depressed you should get battery voltage. If not check reed switch at rear of charge socket. Unplug red wire and you should get battery + voltage on wire coming from socket with - probe on negative battery. If you get nothing, put a jumper from red wire going toward the passenger side of cart to the Positive battery post.

[47dodge]

my ezgo quit and I was checking it out and put a jumper between the two big solenoid post and the cart moved with the throttle. replaced solenoid same thing. I did notice the new one has a small diode between the small posts and another between the large post. the old one does not. if you check the small post they have battery voltage if you put red on volt meter to the post and sepreatly ground it if you check both posts red on one black on the other nothing with throttle down solenoid does not click either.

[JohnnieB]

Sounds like you have a problem in the solenoid activation circuit.

A '93 could be a Marathon or a Medalist, which do you have?

[47dodge]

don't know the difference marathon or medalist how do I tell

[JohnnieB]

Looking at the pictures on this site should ID which type: http://www.shopezgo.com/customer-ser...ialNumber.html
You might luck out and entering the serial number might tell you what it was when it left the factory, but the older records are iffy.

I've got schematics with the solenoid activation circuited highlighted for both types, just don't know which to post.

[47dodge]

think its a marathon