|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
08-06-2009, 02:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 4
|
89 PG3 What should compression be
I have a 1989 EZGO. that will not start!
I believe it is a PG3 engine? Compression tested to 120 psi. Ran leak down test and was seeing gas coming out of the crank seal. Reed valves look good. I have already went through the carb. Am I on the right track????? Is a 120 psi compression enough for these type motors? Can anyone help a new guy out??? Thanks, Pete |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G-2 compression | Gas Yamaha | |||
| need help on compression | Gas EZGO | |||
| G-1 Low compression | Gas Yamaha | |||
| Why is there no compression unless | Gas EZGO | |||
| g1 compression | Gas Yamaha | |||
Threaded Mode