lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-16-2013, 10:00 AM   #1
abbevilletire
Not Yet Wild
 
Join Date: Feb 2013
Posts: 5
Default Ezgo dcs solenoid clicks but wont disengage and wont move

i have a dcs that wont move. it has a new solenoid and controller. battery pack reads 36.9 v. i also have changed the ITS. all conections are tight but the forward reverse feels funny. could that be bad and that is why the solenoid wont release? is there a way to clean it? why do i jump past terminal five only if my solenoid clicks? because out of all the tests eveything is fine but terminal five but it says skip that test anyhow? what to do now?
abbevilletire is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
need help! dcs clicks but wont move Electric EZGO
1988 Marathon -solenoid clicks-wont move Electric EZGO
91 ezgo solenoid clicks, wont move Electric EZGO
EZGO just clicks wont move Electric EZGO
solenoid clicks/ wont move Electric EZGO


All times are GMT -5. The time now is 08:03 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.