Fried controller?

Bluerock · 08-28-2017, 04:31 PM

Bought a 93 Marathon a few weeks ago and have been lurking this forum since. I'd like to give a special thank you to scottyb, who I've corresponded with via email, and JohnnieB who has no idea that he's been helping me this whole time through old posts. I think I have my problem figured out but wanted to confirm. When I place the DVM positive to battery + and DVM negative to Pin-1 on the controller, I show pack voltage. I assume the controller is fried....?

Bluerock · 08-28-2017, 09:31 PM

Any help would be appreciated. Thanks.

08-28-2017, 04:31 PM	#1
Bluerock Not Yet Wild Join Date: Aug 2017 Posts: 2	Fried controller? Bought a 93 Marathon a few weeks ago and have been lurking this forum since. I'd like to give a special thank you to scottyb, who I've corresponded with via email, and JohnnieB who has no idea that he's been helping me this whole time through old posts. I think I have my problem figured out but wanted to confirm. When I place the DVM positive to battery + and DVM negative to Pin-1 on the controller, I show pack voltage. I assume the controller is fried....?
Bluerock Not Yet Wild Join Date: Aug 2017 Posts: 2

08-28-2017, 09:31 PM	#2
Bluerock Not Yet Wild Join Date: Aug 2017 Posts: 2	Re: Fried controller? Any help would be appreciated. Thanks.
Bluerock Not Yet Wild Join Date: Aug 2017 Posts: 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2000 Ezgo DCS- fried controller	Electric EZGO
Speed Controller DCS fried	Electric EZGO
Controller Fried?	Electric EZGO
Fried Controller	Electric EZGO
Motor or Controller Fried	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum