|
09-01-2012, 01:50 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Pds wiring
I posted in the sales section but figured i get more views here
I think i can build my own but if anyone has ine that they have taken off in a swap id like to buy it. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-02-2012, 04:46 AM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pds wiring
I don't know about views, but you'd probably get more replies if we knew what you are asking about without going to a different forum area.
|
|
|
|
|
09-02-2012, 07:42 AM
|
#3 |
|
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Re: Pds wiring
Lol i just read my post. Sorry
Im looking for a wiring harness. To switch a cart from series to pds. Mainly the harness from the switches on the dash to the controller. |
|
|
|
|
09-02-2012, 08:19 AM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pds wiring
Here is the stock item: http://www.shopezgo.com/products/Wir...h-for-PDS.html
You might find it for less from a site sponsor. I doubt the likelihood of someone having one lying around is very high.  |
|
|
|
|
09-02-2012, 08:24 AM
|
#5 |
|
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Re: Pds wiring
Since im going with a alltrax controller do u think i need this or can i wiring it myself. Pretty good at making harnesses but didnt know if anything special was needed as far as the plugs and such.
|
|
|
|
|
09-02-2012, 08:45 AM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Pds wiring
It would be easier to have the harness Johnny linked to and the Alltrax adapter.
Seems to me that when a friend of mine made this same change (years ago) he ended up buying 2 harnesses from the Ezgo dealer? |
|
|
|
|
09-02-2012, 09:03 AM
|
#7 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pds wiring
Everything under on the dash connects with 0.250" push-on connectors.
Same for the F1&F2 connections on the Allttrax controller. The high current terminal use bolts and nuts. The 10 pin connector is an off the shelf Amp 1-640427-0 In fact, you might be able to use quite a bit of the existing Series cart wiring. Just saw Scotty's post. I'll defer to his expertise on such modifications.  Last edited by JohnnieB; 09-02-2012 at 09:05 AM.. Reason: added comment. |
|
|
|
|
09-02-2012, 09:51 AM
|
#8 |
|
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Re: Pds wiring
That amp connector is that the one that plugs on the altrax controller?
|
|
|
|
|
09-02-2012, 09:59 AM
|
#9 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pds wiring
Yes, it is the 10 pin connector on top.
Go to Alltrax site and they have a PDF file on it at bottom of the DCX controller page |
|
|
|
|
09-02-2012, 11:40 AM
|
#10 |
|
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Re: Pds wiring
Cool deal. Thats all ill need is a wiring pdf. And that plug.
On alltrax pds adapter theres a couple of plugs thats like piggybacked with another plug is that something to worry about? |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Controller wiring/DCS fnr switch wiring | Electric EZGO | |||
| Wiring Help | Gas EZGO | |||
| New to wiring | Electric EZGO | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
Linear Mode
