lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-25-2009, 09:09 PM   #1
08mxkfx
Not Yet Wild
 
Join Date: Mar 2009
Posts: 3
Default Clutch Bolt Thread Specs

I was intalling a new spring in the clutch and the outer sheave was a pain in the a** to get off. Got it off finally with a steering wheel puller but when i got it all back together i couldnt get the bolt on and i forced it alittle and ended up striping the bolt out and the first little bit of the shaft. i was wondering if anyone kew what the thread pitch it is and what diameter?
08mxkfx is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Torque for clutch bolt Gas Club Car
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car
88 cc threads in clutch bolt Gas Club Car
trouble getting clutch bolt out Gas Yamaha
sheared bolt in the drive clutch Gas Club Car


All times are GMT -5. The time now is 06:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.