|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-24-2015, 05:07 PM
|
#11 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Need help with looking at a G29
Pretty good price for a "fleet cart".
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-25-2015, 10:57 AM
|
#12 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help with looking at a G29
Started putting the lights on yesterday so am learning how it comes apart. Cleaning as I go. Found about half of a golf course under the pedals
 Body is extremely clean. Only scratch it has my buddy did yesterday with the deburring tool. Was cleaning the hole and it slipped.  I told him he was fired. |
|
|
|
|
12-25-2015, 03:44 PM
|
#13 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help with looking at a G29
Well she has another scratch now.
But the tail light covered it up Hopefully got the lights in right. |
|
|
|
|
12-25-2015, 05:12 PM
|
#14 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Need help with looking at a G29
Peel those number stickers off, they diminish the look
 . A heat gun or hair dryer to soften the glue will make most of the glue stay on the sticker, the rest can be removed with a rag with some wd40 on it. Otherwise, lookin' good! |
|
|
|
|
12-25-2015, 05:33 PM
|
#15 |
|
Not Yet Wild
Join Date: Oct 2015
Location: Braselton, GA.
Posts: 61
|
Re: Need help with looking at a G29
Looks like a good deal. When I was shopping all the fleet-carts I looked at around here were pretty used-up. And they wanted way more that that! Bought our TXT from the original owner who was a RV'er/camper. It has never seen a GC. Paid a little more for it, but very happy!
|
|
|
|
|
12-25-2015, 07:25 PM
|
#16 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help with looking at a G29
cg, I may have to leave them on there. I'm back up to 6 carts again so I may need them to tell it apart
I'm seriously thinking about going to get another one... |
|
|
|
|
12-25-2015, 08:16 PM
|
#17 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Need help with looking at a G29
LOL, some of us really have a problem around here... So many carts.. I got a bunch too.
|
|
|
|
|
12-25-2015, 08:26 PM
|
#18 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help with looking at a G29
Now I just need some speed. Need to pull out the gps and check top speed. Roughly what is the cost of the speed code update? Or am I better off buying an XCT.
|
|
|
|
|
12-25-2015, 11:41 PM
|
#19 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Need help with looking at a G29
If you are keeping "street sized wheels", and using it for the street, and not too many hills, the stock controller with ptv code will do (around 19-20mph). I have seen loaded street carts drop below 10mph on hills with stock controller. Ptv code is roughly 1/4 the price of XCT controller (and 1/4 is the quality of the driving experience improvement, compared to XCT). You should see 13-14mph right now.
|
|
|
|
|
12-28-2015, 10:41 AM
|
#20 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help with looking at a G29
Well put a speedometer app on the phone and got a blistering 12mph !!! That will not do.. Guess I will start saving my pennies for an XCT
 |
|
|
|
|
|
||||||
|
|
Linear Mode
