|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-29-2016, 09:20 PM | #11 |
Not Yet Wild
Join Date: Mar 2016
Posts: 7
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
I removed the black plastic cover with the tow/run switch and took these pics. I don't see any connector to plug up any handheld device unless I missed it. And I didn't see a slot to input a key for freedom mode.
20160328_173830.jpg 20160328_173822.jpg 20160328_173841.jpg 20160328_173850.jpg 20160321_235730.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-01-2016, 05:26 PM | #12 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
Buried in mass of cables .
I can see black loom and what looks like part of cap. |
04-02-2016, 10:04 AM | #13 |
Not Yet Wild
Join Date: Mar 2016
Posts: 7
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
You can see the black loom and part of a cap to what?
|
04-02-2016, 10:56 AM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
That you plug the programmer or unlock key into. Its in that mess of wires, 4 wires to the plug inside black wire loom.
|
04-02-2016, 11:03 AM | #15 |
Not Yet Wild
Join Date: Mar 2016
Posts: 7
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
So is the programmer that I use a Curtis 1314-4401 programmer or a Danaher programmer?
|
04-02-2016, 11:41 AM | #16 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
Curtis with adapter to round plug.
(see key pic in CGtech's post on first page of this blog) |
04-04-2016, 10:28 PM | #17 |
Not Yet Wild
Join Date: Mar 2016
Posts: 7
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
I took some more pictures to get a closer look. Is this the plug that I am looking for to plug up the passkey or Curtis programmer to? And if so, where can you get one of those passkeys to unlock freedom mode?
20160404_151305.jpg 20160404_151316.jpg 20160404_151338.jpg 20160404_151346.jpg |
04-05-2016, 01:45 AM | #18 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
You have found it!. It requires an adapter for the programmer (1314-4401). And that is also where the passkey goes (only once to unlock, it doesnt stay there). The passkey only comes from ezgo, i think anyone could order it from ezgo. Sorry if I seemed impatient I truly don't mean to be.
|
04-06-2016, 09:45 AM | #19 |
Not Yet Wild
Join Date: Apr 2015
Posts: 6
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
The Single use passkey part number is 629677. It's not shown on their website you have to phone a dealer and ask them to order it. Should be 100-150 Clams depending on where you get it.
|
04-06-2016, 02:55 PM | #20 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: Increasing Speed for a 2012 48V RXV Standard Electric EZGO
I would call you local dealer and ask them what they would charge to update it. They usually buy the ones that will update 20 carts then charge whatever amount to update a single cart.
|
Tags |
2012 48v electric rxv |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
More speed for 2012 Ezgo TXT | Electric EZGO | |||
increasing speed | Gas Club Car | |||
2002 txt electric ezgo standard 36 volt problems | Electric EZGO | |||
Increasing Speed? | Electric Club Car | |||
Increasing speed on a EZGo PDS TXT | Electric EZGO |