|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-02-2021, 08:15 AM | #1 |
Not Yet Wild
Join Date: Apr 2021
Posts: 12
|
Help with rear block issue (brake mount in the way)
So I've been installing a drop axle 6" lift on my 2019 EZGO TXT. The front went well but the rear blocks are giving me an issue. I've done some research on here but wanted to get some input on my situation. My brakes are mounted on top of the hub and the block doesn't have clearance to fit. I've seen were guys flip the brakes to the under side. I'm wondering if I just have the wrong blocks for my year cart or is this something everyone has to do with a lift. I'd rather just buy the correct blocks if so. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-13-2022, 10:40 AM | #2 |
Not Yet Wild
Join Date: Jun 2019
Location: Aransas Pass, Texas
Posts: 27
|
Re: Help with rear block issue (brake mount in the way)
I had to pull the hubs and swap sides which puts the brake cable on the bottom which allowed the drop axle kit to bolt up properly.
|
Tags |
rear block issue |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fuse Block Where to mount | Electric Club Car | |||
Accessory Fuse Block ---Where to mount it | Electric Club Car | |||
CC DS - Where to mount fuse block and ground bus bar? | Electric Club Car | |||
G9 big block mount | Big Block Talk! | |||
Fuse Block Mount | Gas Club Car |