where can I get the driverside seat back weldment

[coldair]

somehow mine is broken at least I know now where the creaking was coming from

[Capt. Lenny]

Why not just have it welded?

[coldair]

Originally Posted by Capt. Lenny

Why not just have it welded?

its cracked and bent, plus while I am waiting to get a new one my dogs can still go for their daily rides if I take it to get welded it would take longer and cost more as no one wants to work around here

[kgsc]

Pics? Rear seat?

[coldair]

it looks like it may be a part that came with that cheap rear seat that is fulling apart . I think the bracket that broke helps stiffen the frame which needs to be replaced at some point in time

[Capt. Lenny]

I feel your pain! Nobody around here wants to work either.

[kgsc]

Can’t really tell what is broken.. is it where the seat frame attaches to the upright? Might be able to use an L bracket until you can get it welded.

[coldair]

Originally Posted by kgsc

Can’t really tell what is broken.. is it where the seat frame attaches to the upright? Might be able to use an L bracket until you can get it welded.

at the base of the back angle it is welded to a flat bar that attaches to the frame in the front and back of the mount. I would really like to replace that plastic rear seat with a better built one but I was looking for something that would make a better bed for one of my goldens to ride on sort of like the bed on the back of a Rhino. I have been looking for bad boy buggy or even better the Baja cage kit, but who knows if they will ever make them again.

I want something kind of like this



or this

[kgsc]

Cushman sells the roll over bars but very proud of them..What about a utility bed? Go look for Rhox box-011t

[coldair]

Originally Posted by kgsc

Cushman sells the roll over bars but very proud of them..What about a utility bed? Go look for Rhox box-011t

that looks like it would fit the bill. it does say it uses the stock hardware which I don't have so I wonder what it is that I need