|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-03-2022, 02:56 PM | #1 |
Not Yet Wild
Join Date: Oct 2022
Posts: 1
|
1998 EZGO TXT Alltrax 48500 install problem
I have a '98 TXT that i purchased the Alltrax SR48500 and supporting solenoid to convert from 36 volts to 48 volts. My old controller had 4 large lugs for cables, one of which is an A2 lug. The instructions that Scott sent mentioned that it would work with the 3 lug Alltrax controller, but it says 2 cables replaced with 1 cable with the same 2 end points. My reading comprehension has obviously taken a hit at some point! Any clarification is greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cart stutters after Alltrax XCT-48500 install | Electric Club Car | |||
1998 G16e Alltrax install help | Electric Yamaha | |||
Alltrax SR-48500 - 96 EZGO TXT | Electric EZGO | |||
Alltrax 48500/Solenoid & FNR install Help | Electric Club Car | |||
Ezgo series Alltrax SPM 48500 question/problem | Electric EZGO |