lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-17-2011, 11:26 PM   #1
fingerpicker
Getting Wild
 
Join Date: Apr 2011
Posts: 125
Default Converting seat to match roof problem

Hello,
I have an older 1982 cart where the top was kind of shot on it and the seat back support bars have about 3 inches broken off into where it screws into the frame, so I found a deal on a newer one for $25. I have still been trying to get those little pieces out. The guy, I guess had broken the seat back bars before and welded them back together and the weld broke and they have been stuck.the new roof came with the 2 back support bars that kind of look hook looking. It looks to be around a 2007 roof with the handles on the back end of roof. My problem is that it won't connect right to where the back of the seat back is. Mine has the 2 seperate seat backs. I'm guessing I'll have to get the solid seat back and different mounts. I Imagine it's going to be kind of difficult getting the stuff just right. I could just get the newer 2007 seat back with mounts and drill the mounts into the frame, and then attach the back roof supports to the mounts, right. I have been looking all over trying to find the cheaper way to do this. I'll try to post pics tomorrow of what I have been trying to do. thank you for any help...
fingerpicker is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-18-2011, 07:02 AM   #2
casper4203
Getting Wild
 
casper4203's Avatar
E-Z-GO
 
Join Date: Dec 2010
Location: Whiteford, Maryland
Posts: 141
Default Re: Converting seat to match roof problem

My cart used to have 2 seat backs. I prefered a single long one. I also re-arranged the back roof supports. The cushion was easy to make. Cut the plywood to what you want. Go to your local craft / fabric store and get the foam and marine vinyl. I used aluminum 1" angle to run laterally behind the seat-back and bolt to the roof supports. Easy custom work. A cart this age is gonna require some custom fab work.
Attached Images
File Type: jpg golf cart new cushions.jpg (142.9 KB, 7 views)
casper4203 is offline   Reply With Quote
Old 05-18-2011, 07:06 AM   #3
casper4203
Getting Wild
 
casper4203's Avatar
E-Z-GO
 
Join Date: Dec 2010
Location: Whiteford, Maryland
Posts: 141
Default Re: Converting seat to match roof problem

PS: There is a "sticky" thread on cover with vinyl
casper4203 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
94 Marathon Electric Roller (W/Rear Seat and Roof) Golf Carts and Parts
EZ GO color match Body and Paint
TXT rear seat and roof support bracket Electric EZGO
WTB! rear flip down seat and roof Gas Yamaha


All times are GMT -5. The time now is 12:12 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.