01-16-2012, 05:56 PM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Rubber molding
oK, I have a 88 EZGO and on Wed the rubber molding I order will be here and I would like some input to installing, I seen on the web site I order it from said to put it in hot water. Is this a good way it put the molding on?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2012, 09:11 AM | #2 |
Not Yet Wild
Join Date: Jan 2012
Location: Blue Springs,Mo
Posts: 49
|
Re: Rubber molding
yes it makes it more pliable to install,may have heat it up again if you don't work fast enough
|
01-17-2012, 04:21 PM | #3 |
Not Yet Wild
Join Date: Oct 2011
Posts: 25
|
Re: Rubber molding
I used a heat gun, it went right on and also smoothed out the corners.
|
01-17-2012, 04:26 PM | #4 |
Gone Wild
Join Date: Nov 2010
Location: Swanton, Ohio
Posts: 289
|
Re: Rubber molding
You could take it in the house and do it. I mean the golf cart
|
01-17-2012, 05:47 PM | #5 |
Gone Wild
Join Date: Jun 2008
Location: Raytown, Missouri
Posts: 894
|
Re: Rubber molding
Hair Dryer works also
|
01-17-2012, 06:09 PM | #6 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Re: Rubber molding
I will have to use a hair dryer, cuz dont have a heat gun.
Thanks And Jwhall you would like to see me get my A#$ kicked, you need |
01-17-2012, 06:22 PM | #7 |
Gone Wild
Join Date: Nov 2010
Location: Swanton, Ohio
Posts: 289
|
Re: Rubber molding
Actually you need help. What about the weekend..
|
01-17-2012, 06:23 PM | #8 |
Gone Wild
Join Date: Nov 2010
Location: Swanton, Ohio
Posts: 289
|
Re: Rubber molding
Wheres the pic's
|
01-17-2012, 06:27 PM | #9 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Re: Rubber molding
|
01-17-2012, 06:34 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Rubber molding
Make sure all the little dents and dings are pulled out of the metal edge and spray the rubber bumper groove with wd40 to assist in sliding it on.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rubber Trim/Molding Help | Gas EZGO | |||
Rubber Molding EZGO 1965 to 1994 Marathon | Golf Carts and Parts | |||
body molding | Golf Carts and Parts | |||
Rubber Trim/molding on 81 Marathon | Gas EZGO | |||
Marathon Rubber Molding | Electric EZGO |