11-20-2012, 04:58 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Chico, California
Posts: 496
|
03 mcor question
Ser # AQ 0337 321701 2003 CC 48v . Push the go pedal about 2+ inches before anything happens, I hear a click in the mcor at the same time the solenoid clicks and then it seems normal just alot of free travel.
Pack voltage is 50.4v purple/white wire has 50.4v white wire has 4.75 yellow wire has .25v push pedal voltage increases to 4.55v book calls for 4.65v is this OK? When checking ohms I have to blip the pedal to get the low reading yellow + purple/white- 2.55Kohms blip the pedal drops to 1.71 pedal all the way to the floor is 9.26kohms yellow+ white- 11.5 kohms blip pedal drops to 9.63 pedal to the floor 1.60kohms Should there be 2+ inches of free travel before any throttle response? what do ya think replace mcor? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-21-2012, 06:12 AM | #2 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: 03 mcor question
. . . check for wear at the base of the GO pedal where the MCOR input shaft makes contact with it . . . see if the GO pedal moves forward for this 2" distance before the MCOR input shaft begins to rotate . . . if this is problem, there are several backyard mechanic fixes for this, or you can just purchase a replacement GO pedal and input shaft . . . $40 at CC dealer . . .
|
11-21-2012, 09:51 AM | #3 |
Gone Wild
Join Date: Jan 2012
Location: Chico, California
Posts: 496
|
Re: 03 mcor question
I'll check it today. Thanks.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
MCOR question | Electric Club Car | |||
Re MCOR | Electric Club Car | |||
Is my MCOR going bad? | Electric Club Car | |||
MCOR Diagnosis Question (IQ/Regen cart) | Electric Club Car | |||
mcor | Electric Club Car |