01-22-2013, 08:33 AM | #1 |
Not Yet Wild
Join Date: Jan 2013
Posts: 23
|
Bore Size
I am having some difficulty finding out the stock bore size of a 2002 EH35C engine. About 5 years ago, I replaced the pistons and rings, and now the engine has low compression (90# per cylinder) and it smokes. I don't want to buy blind and get 0.25mm oversize pistons if the block is worn past that point. I disassembled the engine last night, and there is no ridge to speak of on top of the cylinder. However, there is a lot more "slop" than I think is necessary when I insert the piston inside the existing hole.
What is the bore size of the 350 cc Robins engine? Are 0.50mm oversize pistons available? Thanks in advance for your help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-22-2013, 06:48 PM | #2 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: Bore Size
2.6378-2.6385" is standard bore for the 350, piston oversizes are.25 and .50mm.
|
Tags |
350cc, cylinder, piston, rebuild |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
bore size for g22 | Gas Yamaha | |||
bore out on G16 | Gas Yamaha | |||
What is the original bore size of a FZ340? | Gas Club Car | |||
G1 bore | Gas Yamaha | |||
Flat head bore size? | Gas Club Car |